snapcraft 8.0.2 from the stable channel. The newer versions of snapcraft print output on one line, updating rather than scrolling. When a part (such as an override-build snippet) fails, the log file is displayed, but snapcraft then overwrites that line. So it's not possible to easily copy/paste the log file in order to display it: alan@nuc:~/Source/popey/spectrum-analyser-snap$ snapcraft --use-lxd 'override-build' in part 'spectrum-analyser' failed with code 1.lyser/build/8BitAnalysers/Source/ZXSpectrum/build/CMakeFiles/CMakeOutput.log". Review the scriptlet and make sure it's correct. Failed to execute pack in instance. Recommended resolution: Run the same command again with --debug to shell into the environment if you wish to introspect this failure. Full execution log: '/home/alan/.local/state/snapcraft/log/snapcraft-20240209-115359.161950.log' Note the CMakeOutput.log path is shown as: 'override-build' in part 'spectrum-analyser' failed with code 1.lyser/build/8BitAnalysers/Source/ZXSpectrum/build/CMakeFiles/CMakeOutput.log". It likely should be: 'override-build' in part 'spectrum-analyser' failed with code 1 project/parts/spectrum-analyser/build/8BitAnalysers/Source/ZXSpectrum/build/CMakeFiles/CMakeOutput.log". Steps to reproduce: A simple part, which will fail due to a missing build-package. spectrum-analyser: plugin: nil override-build: | git clone --recursive https://github.com/TheGoodDoktor/8BitAnalysers cd 8BitAnalysers/Source/ZXSpectrum mkdir build cd build /usr/bin/cmake .. make build-packages: - build-essential - cmake - libgl-dev - libx11-dev - libxrandr-dev